3) 泵找平后，垫铁组应露出底座10～30mm。地脚螺栓两侧的垫铁组，每块垫铁伸入泵底座底面的长度，均应超过地脚螺栓，且应保证泵的底座受力均衡。若泵底座的底面与垫铁接触宽度不够时，垫铁组放置的位置应保证底座坐落在垫铁组承压面的中部。After the pump is leveled， the shim plates sets shall be 10~30mm exposed out of the As for the shim plates sets at both sides of anchor bolts， the insertion length of each shim plate under the pump baseplate shall exceed the position of anchor bolts， and shall assure the even stress imposed to pump If the contact width of pump baseplate and shim plate is not enough， the position of shim plate must assure that the base plate is seated on the middle of shim plate bearing 我能和你找到，加我扣扣号---我的名字号
